The Cornet Technology Communications’ Connector Adapter Panel (CAP) is a passive mechanical interface between two physical interface connector types.

We offer four different versions.

Connector Adapter Panel - BNC to 50-Pin Telco. This CAP panel has 64 BNC connectors; one input and one output for each of 32 ports. Three 50-pin interface connectors are mounted on the reverse side of the panel. The 50-pin connectors are labeled “Top”, “Middle”, and “Bottom”. 

Download more information on the CAP -BNC to 50-Pin Telco

Connector Adapter Panel - DB-15 to Telco 50-Pin.  This CAP panel is a low profile design with 32 DB-15 connectors on one side and three 50-pin Telco interface connectors on the other. The 50-pin Telco interface is labeled “Top”, “Middle”, and “Bottom”.

Download move information on the CAP-DB-15 to Telco 50-Pin

Connector Adapter Panel - RJ45 to 50-pin Telco or 64-pin Telco.  The RJ45-Telco Connector Adapter Panel (CAP) is designed to interface with two separate physical interfaces: Telco 64 pin connectors or Telco 50 pin connectors. The two designs are mutually exclusive; only one is used at a time. Each interface connector is cabled to specific RJ45 connectors mounted on the CAP front panel. All TELCO connectors are rear mounted. 
Download more information on the CAP-RJ45 to 50-Pin Telco in pdf format
Download more information on the CAP-RJ45 to 64-Pin Telco in pdf format 

For addtional information on these products call us at 703.658.3400.