Government defense agencies depend on Cornet Technology communication solutions on a daily basis. Our solutions perform a vital role in shipboard, ground, and air-based communication environments ensuring that all network connections are secure or non-secure as required. (more)
Cornet Technology has over 12 years of experience in providing ground and airbourne encoding, decoding, and recording devices for government (military and civilian) and commercial customers. (more)
Embedded computing platform capable of collecting, analyzing and disseminating massive amounts of real-time data
Springfield, Va. -- January 15, 2007 -- Cornet Technology Communications (CTC), the network communications solutions division of Cornet Technology, Inc. (CTI), introduced its Celero CVME-7448M product, the first VME-based PCI Express multi-processing solution on the market, today at the Bus&Board Conference 2007. The Celero CVME-7448M is an embedded computing platform geared towards image, radar and laser processing applications used in state of the art intelligence, surveillance and reconnaissance (ISR) military equipment. The platform is capable of collecting, analyzing and disseminating a high volume of real-time data.
Interested parties are invited to meet with Cornet Technology representatives at the show, January 15 and 16, 2007 at the Hyatt Regency, Long Beach, California. Cornet Technology will be exhibiting at booth #23.
The Celero CVME-7448M is powered by a multi-processing engine consisting of four Freescale PowerPC MPC7448 processors, each running at a clock speed of 1.267 GHz. The processing engine and two PMC/XMC high speed I/O sites are linked in a PCI Express switched fabric interconnect interface via the VME Switched standard (VXS, VITA-41/VITA-41.4), which allows the routing of up to 16 lanes of 2.5 Gbps traffic, both within and outside the VME board. To maintain legacy compatibility, the four processors and the two PMC/XMC sites are linked in a ring topology through a PCI-X local bus, running at 64-bit/100 MHz.
Manville Chan, program manager, Cornet Technology Communications division, said, “The Celero CVME-7448M was designed to address the growing interest in using PCI Express as a switched interconnect interface among military designers. Combining PCI Express and the multi-processing architecture, CVME-7448M provides a powerful solution to satisfy the enormous amounts of intelligence gathered in sophisticated military ISR equipment.”
The Celero CVME-7448M includes board support packages (BSP) for VxWorks® 6.x operating systems, allowing the seamless integration of application codes into a real-time operating system environment.
Cornet Technology has over 15 years experience working with the United States Department of Defense. The company's communications products and services are found in multiple classes of U.S. Navy ships, on U.S. Army bases, on U.S. Air Force bases and in airborne communication centers.
Pricing and Availability
The Celero CVME-7448M will be available for shipping early second quarter 2007 at a starting price of $25,000. Please visit www.cornet.com or call 703-658-3400 for additional information.
In addition, Cornet Technology has produced a white paper, in collaboration with PLX Technology, for distribution at the show.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Specializing in customized COTS boards for low-volume military and aerospace projects
Springfield, VA -- July 11, 2007 -- As COTS vendors abandon older products to stay competitive, they create a void for customers who rely on these products. Where others see obsolescence, Cornet Technology, Inc. sees opportunity. Hence the company's communications division is launching an Embedded Design and Manufacturing Service to address the engineering needs of low quantity, long-term military and aerospace programs. This service is a natural progression for Cornet Technology, Inc. which has an 18-year history of providing responsive custom products to military clients.
According to Manville Chan, CTC's Program Manager for Embedded Systems, “The catalyst for the launch of this service was a contractor who approached us to design a custom PowerPC based VME single board computer. The project presented three unique challenges: obscure technology, an obsolete component, and an unbelievably short time frame. We delivered the project ahead of schedule and sourced the obsolete component from a secondary market to satisfy the customer's exact requirements.”
In the course of fulfilling this contractor'a needs, it was discovered that a number of established vendors were discontinuing their military commercial-off-the-shelf (COTS) products due to industry consolidation and the European Union's RoHS initiative. As a result, military embedded COTS buyers were having difficulty purchasing needed products. This left a gap in the embedded COTS market which Cornet Technology has the engineering knowledge, purchasing skills and manufacturing capacity to fill.
Cornet Technology's Embedded Design and Manufacturing service offers military and aerospace programs with form, fit, and functionally compatible products to those in use allowing them to avoid the need for costly rewrites of their application code and re-qualify their systems.
Further information on the service as well as a portfolio of completed custom products can be found at: www.cornet.com/embedded_services.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Company's Proactive Environmental Posture Reflected in Voluntary RoHS Compliance
Springfield, Va.--(BUSINESS WIRE)--April 16, 2007 -- Cornet Technology, Inc. (CTI) (www.cornet.com), a manufacturing and professional services company, announced today that its corporate-wide environmental protection plan is compliant with the European Union's (EU) Directive on the Restriction of the use of certain Hazardous Substances (RoHS) in electrical and electronic products. Moreover, the company's proactive actions make it compliant with California's recently enacted RoHS legislation.
To meet RoHS requirements, the company upgraded its surface mount assembly line to implement a lead-free process at its Springfield, Virginia manufacturing facility. The enhanced process includes replacing the lead components on circuit boards with new, eco-friendly, lead-free parts. This new surface mount technology (SMT) equipment gives CTI the flexibility to meet all of its customer's product needs now and in the near future. In addition, CTI upgraded its equipment to include a new solder paste printer, which allows very precise printing of the lead-free paste while a new reflow oven, with the capability of reaching the extremely high temperatures necessary for soldering lead-free surface mount components, was also added.
This upgrade also allows CTI design engineers to create compact boards that require less space, while still delivering high-quality product enhancements. Together, these equipment and process upgrades fulfill the requirements of the RoHS Directive, making CTI operations fully RoHS compliant.
The RoHS Directive responds to the growing concerns over human health and environmental risks associated with the use of certain environmentally sensitive materials in the production of electronic products. The EU implemented the RoHS Directive in July 2006, with compliance regarding the use of unleaded solder in telecommunications products targeted for 2010. California, the first U.S. state to apply these standards, adopted similar legislation in January 2007.
CTI's decision to achieve early RoHS compliance positions CTI ahead of most of its competitors in terms of these industry standards. As the telecommunication industry adapts its technology to meet RoHS standards, many component parts will become obsolete. For CTI, the shift to lead-free soldering allows the company to maintain a competitive advantage, while incorporating an ecologically friendly manufacturing process.
Wally Schott, Director of Operations, Cornet Technology, Inc., said, “Cornet Technology made a conscious business decision to become RoHS compliant because the company recognizes that adopting green manufacturing techniques is not only environmentally responsible, but also beneficial to our employees. Even though RoHS regulations have yet to take hold in Virginia, Cornet Technology is proactively working to minimize the impact of our manufacturing facility on the local environment of Northern Virginia -- and our employees -- by voluntarily incorporating the EU and California RoHS directives.”
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Springfield, Va. -- April 30, 2007 -- Cornet Technology Communications (CTC), the network communications solutions division of Cornet Technology, Inc. (CTI) (www.cornet.com), introduced its ClearWave product at the Armed Forces Communications and Electronics Association (AFCEA) Technology Showcase at the Defense Information Systems Agency (DISA) Customer Partnership Conference 2007. ClearWave is an all-optical fiber switch capable of remotely managing optical networks. The solution eliminates the need to change fibers manually from port to port. ClearWave is available in three scaleable configurations 96 by 96, 192 by 192 and 320 by 320 input and outputs.
Interested parties are invited to meet with Cornet Technology representatives at the show, April 30 - May 2, 2007 at the Gaylord Opryland Hotel in Nashville, Tennessee. Cornet Technology will be exhibiting at booth #551.
ClearWave supports remote fiber connection and redistribution, remote monitoring and testing, and rapid fault isolation and repair in a network operations environment. The switch reliably connects light between input and output fibers using beam collimators, devices used to straighten and make divergent light parallel as it exits a fiber, and 3-dimensional Micro-Electro-Mechanical System (MEMS) mirror arrays as a switch engine. With MEMS technology, ClearWave switches connections over fiber regardless of protocol or wavelength and through data rates of 40G/OC-768. ClearWave is managed through a graphical user interface (GUI) or a Single Network Management Protocol (SNMP) manager. The GUI facilitates the tracking of various information including connection location, optical power and connection time length.
Mike Hardesty, Director of Marketing and Business Development, Cornet Technology Communications division, said, “ClearWave addresses the need for a scaleable, highly reliable, reconfigurable and easily manageable optical switching solution. The product combines redundant configuration and easily automated fiber network growth and redistribution via remote control. ClearWave provides an efficient, cost-effective solution, reducing configuration errors and operating costs, while increasing network performance.”
Cornet Technology has over 15 years experience working with the U.S. Department of Defense. The company's communications products and services are found in multiple classes of U.S. Navy ships, on U.S. Army bases, on U.S. Air Force bases and in airborne communication centers.
Availability
ClearWave will be available for shipping 3rd Quarter 2007. Please visit www.cornet.com/optical or call 703-658-3400 for additional information.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Cornet Technology, Inc. was awarded an IDIQ D contract from the Naval Air Warfare Center Aircraft Division (NAWCAD) of the U.S. Navy
Springfield, VA -- August 14, 2007 -- Cornet Technology, Inc. announced today that it was awarded an IDIQ D contract from the Naval Air Warfare Center Aircraft Division (NAWCAD) of the U.S. Navy in the amount of $930K. This award is to provide a replacement processor for the SBS Power Sandia VME single board computer, which is currently in use in the Navy's shipboard IFF System AN/UPX-24(V) F/C 5 as well as other secondary systems.
Under the one base year, three optional year contract, Cornet Technology will provide NAWCAD with its Power PC offering which addresses all the contract requirements. The first order has been received.
Cornet Technology's Embedded Design and Manufacturing service offers military and aerospace programs with form, fit, and functionally compatible products to those in use allowing them to avoid the need for costly reqrites of their application code and requalify their systems. All embedded products are manufactured in the company's ISO 9001:2000 registered facility in Springfield, VA. Further information on the service as well as a portfolio of completed custom products can be found at: www.cornet.com/embedded_services.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
The beauty of the IPGate 1000-16 is that it combines legacy transport over TCP/IP with interface test and monitoring
Springfield, VA -- October 24, 2007 -- Cornet Technology, Inc. (CTI) today announced the availability of two new products, the IPGate-4 and the IPGate 1000-16. Both products use Circuit Emulation Service (CES) technology to transport T1/E1 and other legacy services over TCP/IP networks. These new products extend the life of existing applications and infrastructure that cannot easily be migrated to IP networks.
The IPGate-4 is a compact device that is ideal for moving applications running on leased T1 lines to IP networks such as the GIG-BE with little or no technical pain. The unit can support up to four balanced T1 or E1 lines which can be all data, all voice, or a mix of both. The more T1 lines presently used the better the Return on Investment (ROI). Use of the IPGate-4 reduces required manpower, simplifies troubleshooting, and saves space by reducing the amount of network equipment needed. The product is available immediately. Contact the company for pricing.
The IPGate 1000-16, multiservice access concentrator, offers advanced technology features that reliably transport legacy Time Division Multiplexing (TDM) and other circuit based applications across converged IP networks. Using circuit emulation services over packet standards, the IPGate 1000-16 supports a wide variety of legacy analog and digital interfaces at configurable data rates ranging from 75 bps to 8.192 Mbps. It lets customers easily and reliably take advantage of converged IP networks to connect legacy circuits.
The IPGate 1000-16 supports point-to-point Time Division Multiplexing (TDM) trunks over IP networks without requiring changes to the TDM equipment; provides T1/E1 frame-agnostic trunks for PBX interconnection across an IP network, lets digital and analog radio systems natively connect over a shared IP infrastructure or use the Internet as a back-up for enhanced disaster recovery; provides media conversion for 10/100Base-T over redundant 1000Base-FX; give access to legacy interfaces for test and monitoring. The IPGate 1000-16 will be available Q1 of 2008. Contact the company for pricing.
According to Mike Hardesty, Marketing Director for Cornet Technology's Communication Division, “Organizations looking to save money on network equipment as well as space will find that both IPGate products will bring them measurable return on investment within two to four years. Additionally, the IPGate 1000-16 will allow users to test and monitor their legacy interfaces as well as help manage connectivity.”
Cornet Technology will be demonstrating these products at the Milcom Conference and Exhibition 2007 in Orlando, Florida, from October 29 through October 31 in booth 235.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Local Firms Profit From Fall Of Dollar
Washington, DC (WUSA) -- November, 17, 2007 -- Some companies in the Washington, DC area are seeing a boost in foreign sales as the American dollar falls in comparative value to foreign currencies, particularly the Euro. As the effect flows through the American manufacturing sector, and exports boom, the foreign trade deficit is falling as well.
"Because the dollar has fallen in price, our products have become very competitive and, as a result, we see a lot of sales activities picking up right now," said Sunhil Mehta, the president of Cornet Technology's Video Convergence Division, which manufactures video surveillance devices used at border crossings and in airports.
The company has about 170 employees, of whom approximately 100 labor in the Springfield manufacturing facility. Executives say the increasing demand caused by the falling dollar, particularly in eastern Europe, is going to mean more work at the Springfield facility, located just off Washington's beltway.
"Absolutely," Mehta told 9NEWS NOW. "We have here all of our products designed, developed and manufactured. And we see that, due to continued growth, we will open up some more slots, and we will have more jobs for local people."
The company has opened subsidiaries in Germany, the United Kingdom, Japan, and India. Seeking to expand markets further, Mehta has just returned from a scouting expedition in Mexico. This week a Cornet sales team is in the Middle East as part of an economic development trip sponsored by the Commonwealth of Virginia.
Cornet has been growing at about 10% a year with a reported $40 million in sales. Mehta says the increasing demand caused by the falling dollar is expected to boost that growth even higher this year.
Written by 9NEWS NOW
http://www.wusa9.com/rss/local_article.aspx?storyid=65154
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Cornet Technology takes advantage of Virginia Foreign Trade Mission to Expand into the Middle East
Springfield, VA -- December 20, 2007 -- To expand the international market for Cornet Technology, Inc. products, Edward Siira, VP of Engineering and T.S. Padma Nabhan, Managing Director for Cornet Technology (UK) Limited, recently took part in a trade mission to the Middle East sponsored by the Commonwealth of Virginia.
The purpose the mission was to uncover export opportunities for Virginia-based companies in the Kingdom of Saudi Arabia and the United Arab Emirates (UAE). Cities visited during the nine-day mission, included Dubai and Abu Dhabi in the UAE, and Dammam, Riyadh, and Jeddah in Saudi Arabia.
The mission provided Cornet Technology with an ideal means of finding partners and resellers for its video, voice, and data communication products in the economically growing region. The Virginia Economic Development Program (VEDP) did all the leg work, working with the local chambers of commerce, to match Cornet Technology and the other delegates with interested parties in each city visited. With Dubai's goal of becoming the financial capital of the Middle East, Cornet Technology found opportunities for its A/B and Legacy over IP switches. The company's video analytic products also created interest in the both countries where there is increased interest in security.
When asked what benefit was derived from the trade mission, Mr. Siira said “The VEDP did an excellent job. We came away with a number of leads, especially in the cities of Dubai and Dammam.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Two new product offerings fill a niche for extended-life PMC products
Springfield, Va.-- February 14, 2008 -- Cornet Technology Inc., a global manufacturing company of video, voice, and data communication products, today announced that it is entering the PMC product market. The company's initial offerings are the CPMC-722, a graphics display controller card, and the CPMC-DSCC, a high speed serial communications card. With these products Cornet Technology is giving buyers a fresh PMC product resource. For qualified buyers, the company is offering a 30-day evaluation of these products.
PMC remains the most popular mezzanine module standard used in the board-level COTS industry. Because of this continued popularity, Cornet Technology is seizing the opportunity to manufacture off-the-shelf PMC products which provide buyers with long-term availability guarantees as well as products responsive to customers's specific design requirements and software support needs. The CPMC-722 and CPMC-DSCC are the first of the company's PMC offerings.
The CPMC-722 offers a variety of graphics display options for CRTs and LCDs. The board's 8 MB of internal SGRAM video memory improves the graphics controller performance by making the read/write process more efficient. It supports up to 1280 x 1024 x 24-bit color resolution which is ideal for viewing on 19” monitors. For those requiring advanced graphical display applications, the CPMC-722 comes with a 128-bit 2D/3D floating point rendering engine for enhanced precision display. Its Motion Compensation block feature enables full frame MPEG-1/DVD playback, and its 200 MHz RAMDAC improves the refresh rate of CRTs. The board comes with a device driver for the latest version of the Linux operating system. The CPMC-722 is available now. An extended temperature version is also available.
The CPMC-DSCC provides up to 10 Mbps for synchronous and 2 Mbps for asynchronous communication transfers. The board supports a full range of protocols including HDLC, SDLC, LAPB, LAPD, PPP, ASYNC, and BISYNC. Additionally, the module has a 17 DWord FIFO per receive channel, an 8 DWord FIFO per transmit channel, and a 128 DWord central FIFO for both transmit and receive. The Linux device driver supports both asynchronous and synchronous (SDLC) modes.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Appointment to accelerate company's entry into the Utility Market
Springfield, Va.-- March 18, 2008 -- Cornet Technology, Inc., a global leader in video, voice, and data communications solutions, today announced that it has brought in Ramesh (“Rudy”) Shankar to spearhead business development into the utility market for its Video Convergence division. Reporting to Video Convergence president Sunil Mehta, Dr. Shankar will focus his utility expertise into identifying and developing utility business for the company's smart video surveillance products and solutions.
“Dr. Shankar's 30 years of experience in developing markets and running projects as well as his expertise in delivering practical technology solutions make him an ideal choice to head the company's business development for the utility market,” said Sunil Mehta. “His understanding of the utility industry as well as his wide network of industry contacts will be an asset in generating new clients and meeting the division's revenue objectives.”
Dr. Shankar is the founder of Signatech Systems which is dedicated to the global power industry and its supply chain. His work experience includes the Electric Power Research Institute (EPRI) where he held various marketing and technical positions within its power generation and power delivery sectors; and with Fortune 50 companies such as Honeywell and AMF.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
24-port design mirrors standard router port configuration
Springfield, VA -- July 9, 2008 -- Cornet Technology, Inc. today announced the availability of its latest intelligent protection switch the RPS-24 that is targeted at backing up routers in dark or dim sites where continuous up-time is critical and rack space is at a premium. Its 24-port design mirrors that of a standard network router for perfect connectivity synergy.
The RPS-24 switch provides intelligent one-to one back-up for routers using automatic A to B, B to A switching. By actively monitoring all active IP circuits from the router, it can detect a problem, automatically switch the circuit to a backup router, and issue an alarm indicating repair is necessary. Its proven latching relay technology ensures that even in a power outage the connection is maintained.
According to Pierre Bretault, VP of International Sales at Cornet Technology, Inc., “No matter how robust and reliable a router is there is still a chance that a component will fail. When it is vital that your router network has continuous availability, then this smart switch is a perfect solution. It gives you the added confidence that your network will continue to function in the rare incidence of a router failure.”
The RPS-24 is available for immediate shipment.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
Latest COTS offering focuses on low power consumption design
Springfield, VA -- April 21, 2008 -- Cornet Technology, Inc., a global manufacturing company of video, voice, and data communication products, today introduced its first conduction cooled VME PowerPC single board computer, the Celero™ CVME-7448ST-CC. This latest member of the Celero CVME 7448 family provides a versatile processing platform for signal intelligence applications such as image-, RADAR-, and SONAR-processing that require top of the line performance and low power consumption in rugged environments.
The Celero CVME-7448ST-CC targets the need of military VME designers for conduction cooled single board computers. By incorporating the Tundra Tsi109, the Celero CVME-7448ST-CC is able to lower power consumption, which is a significant advantage for applications operating in harsh environments where air flow cooling is not possible.
Like its sister product the CVME-7448ST, the CVME-7448ST-CC incorporates the latest DDR2 technology, that eliminates memory latency caused by pipeline blockage thus improving performance by up to 9%. Both Linux and VxWork 6.5 operating systems are supported, allowing embedded designers to port existing code and algorithms. Other features of the CVME-7448ST-CC include 512MB DDR2 SDRAM, 256MB Flash, 2 PMC sites for I/O expansion, 2 high-speed Gigabit Ethernet ports, 2 serial ports, and 2 USB 2.0 ports.
The CVME-7448ST-CC is available Q2 2008.
About Cornet Technology, Inc.
Cornet Technology, Inc. is a leading communications equipment supplier to the defense industry in the United States and overseas. Its solutions deliver voice, video, and data communications and video management solutions to some of the world’s most exacting users. Headquartered in Northern Virginia, CTI has wholly owned subsidiaries in Germany, Japan, and India. Information on CTI's products and services is available at the CTI web site www.cornet.com.
PR Contact:
Rosemarie D'Agostino
Marketing Communications Director
703.658.3400
Email: pr(at)cornet.com
