MTX-MR
PBX Conference Switch
The MTX-MR is a compact PBX conferencing switch designed for military installations and applications. The switch automates the connection of ISDN (BRI) telephone lines to cryptographic devices or encrypted radios, thus minimizing operator errors. The MTX-MR handles up to eight simultaneous conference calls of up to 16 parties each.
Download more information on the MTX-MR switches in PDF format
MTX-R
Red Data Switch
The MTX-R Switch is a ruggedized non-blocking, high-speed digital matrix switch designed for shipboard applications. The Red Digital Switch (RDS) allows the interconnection of 512 ports.
The RDS switch may be populated with either 16 Fiber Optic or Copper I/O cards that will connect a maximum of 32, 16-port port concentrator units (PCU).
Download more information on the MTX-R switches in PDF format
MTX-R RCS/RDS Split Engine
Red Data Switch and Red Conference Switch
MTX-R RCS/RDS combines the functionality of the Red Conference (RCS) and Red Digital (RDS) switch into a single compact package that is ideal for applications where space is limited. This combined switch fits into our standard ruggedized military chassis and will hold any combination of nine RCS style I/O cards and five RDS style I/O cards.
The Red Conference Switch section of the split-engine can connect to a maximum of 198 dual sourced ISDN telephones (18 PRIs) and a maximum of 144 crypto devices. A conference call may include up to 30 parties on a single crypto device. A switch will handle 144 simultaneous conference calls from any telephone supported by the conference switch. Phone supported include TA/970 analog telephones, PICT 7300s and 7500s, IVUT ISDN dual homing terminals, the Cornet Technology family of ISDN phones (CT-2100/2200/2250 and 5000), and VoIP terminals.
Download more information on the MTX-R RCS/RDS in PDF format
MTX-R BTS
Tactical Switch
Uniquely designed for shipboard applications, the MTX-R BTS is a non-blocking, high-speed matrix switch that performs automated switching and control of clear and encrypted signals among modems, encryption devices, radio transmitters, and receivers. Capable of interconnecting up to 512 individual wideband (25 KHz) analog ports, the MTX-R BTS handles both analog and digital interfaces, and controls both narrowband and wideband signals with ease. The BTS passes the entire 12-wire interface, including all discretes and audio, with one connection in the switch. In the event of total power loss, one in every three ports is capable of being manually patched.
Download more information on the MTX-R BTS switches in PDF format
Port Concentrator Units
CTC's port concentrator units do more than cable management. These flexible units can be utilized to perform link extension allowing WAN lines to be extended from one end of a campus to another. The SuperPCU offers redundant power supplies as well as optional dual controller cards with independent fiber connections. This allows each path to be run differently providing an extra level of protection.
Download more information on the PCU units in PDF format
MACX
CTC's MACX performs multiplexing and Digital Cross Connect Systems (DACS) switching as well as provides enhanced channel bank capabilities. This innovative device converts any type of WAN interface to a DSO/DS1 channel, incorporates the channel into a standard T1 frame and sends it to the T1 network. The MACX combines data from multiple (up to 64) separate inputs into one or more T1/E1 outposts and handles data rates from 56/64 Kbps to a full T1 in N by 56 or 64 K increments. Data returning on the same T1/E1 channel is routed back to the proper user I/O automatically. The MACX chassis supports up to 16 T1/E1 output ports and features dual-redundant power supplies.
Download more information on the MACX in PDF format
PATCH PANEL. SB4124C/WSC (NSN 5815-01-171-4468)
The SB-4124(C)WSC is a flexible 17-channel,24-circuit per channel patching switchboard that patches both digital and analog signals. It is utilized to manually reconfigure the interconnection of a communication system consisting of data communications equipment (DCE), data terminal equipment (DTE) and transceivers, remote controllers and mobile communication systems and for the easy and efficient rerouting and testing of digital signals.
The switchboard consists of a chassis with a rear mounting plane that holds 34 DB-25 connectors and patch modules. The mounting plane is engineered to allow the DB-25 connectors to automatically mate with the patch modules when the module is inserted into the chassis to speed manual connections.
Download more information on the Patch Panel in PDF format
For further information on our product lines or to order contact us at 703.658.3400 or email us at sales.CTI (at) cornet.com.
|
